Certification: FAA-PMA - Log book entry. Premium powder coat finishing. Optional CESSNA logo. Cored/drilled in both grips for internal wiring. Electric trim switch plate option. Multiple switch positions available in both grips. GARMIN GFC 500 autopilot ready.

FAA-PMA approved, all aluminum control yokes are finished with durable powder coat and can be installed on virtually all Cessna aircraft, see Cessna Model Applicability List   Each yoke is cored/drilled for internal wiring of all switches.  All mounting hardware and hubs for either standard 3/4" or 1.25" Cessna control shafts are included. Installation time is approximately 1-2 hours.

Installation takes approx. two hours. Install kit includes all the necessary hardware. The yokes mounts to either 3/4 " or 1.25" shafts.  On 150, 170, 172, 175, 180, 185 models with original 3/4" shafts, the rivets  are removed and replaced with machine screws and nuts . Aircraft model list and Installation Instructions included.

Internally drilled for wiring. Garmin GFC-500 Electric trim switch plate available. Solid heat treated aluminum. Each wheel has provision in both grips for multiple switch positions. PTT switch positioned for easy use.

Download INSTALLATION MANUAL     Click Here

The hub/shaft adapter is bolted to the wheel in four height adjustable positions and reinstalls onto the aircraft control shaft in same manner as the original control yokes . Rivets removed to release the orinal yokes are replaced with machine screws on Cessna 150, 170, 172, 175, 180, 185 models.